134
ICC
o
Remap floor 3’s monitor data registers:
•
Enter “3000” into the
Start Reg
field.
•
Enter “3” into the
Num Regs
field.
•
Enter “12” into the
Database Addr
field.
•
Click
Create
.
o
Remap floor 1’s command data registers:
•
Enter “3003” into the
Start Reg
field.
•
Enter “3” into the
Num Regs
field.
•
Enter “112” into the
Database Addr
field.
•
Click
Create
.
Finishing Up
•
Download the configuration to the gateway (see section 8.1 for more
information on downloading a configuration to a device).
•
Connect to the gateway with your PLCs.
