175
ICC
10.12.4
Class 1 (I/O) Data Configuration
For more information, refer to
Produced Data Start Address
and
Consumed
Data Start Address
in section 8.7.6.1.
10.12.5
Submitting Changes
Whenever any of the EtherNet/IP server configuration elements have been
changed, the “submit” button must be clicked in order to write these settings to
the gateway’s filesystem.
Note that because these configuration elements are read from the filesystem only
when the gateway boots up, the act of submitting configuration changes will also
reset the gateway. Please allow 20 seconds for the gateway to reboot, at which
time it will then be operating with the recently-submitted configuration.
