62
ICC
Starting Point
This field is the starting point in a device's range of points. Enter a value between
0 and 16777215 (0x0 – 0xFFFFFF). If the targeted server uses 1E frames and
the Device Code or Code Value is set to a bit device, the starting point should be
a multiple of 16.
Num Words
This field is the number of words from the
Starting Point
that are to be accessed
by this service object. Enter a value between 1 and 722 (0x1–0x2D2). If the
targeted server uses 1E frames, then the maximum value should be limited to
256 words. If a larger value is entered, the driver will internally limit the value to
256. The targeted server may also impose additional limitations (please refer to
the MELSEC server equipment user’s manual.)
Database Addr
This field is the database address where the first point of this service object will
be mapped. Enter a value between 0 and 4094 (0x0 – 0xFFE).
Service Object Status
If it is desired to reflect the status of this service object, check the
Reflect Status
checkbox and enter a database
address
between 0 and 4080 (0x0 – 0xFF0) at
which to store the status information. For more information on reflecting the
status of service objects, refer to section 8.5.2.
