background image

OPERATING & MAINTENANCE MANUAL

 

 

PACKAGED TERMINAL AIR CONDITIONER (PTAC) – RSAN

2

WELCOME

Congratulations on your selection of ICE AIR  
Packaged Terminal Air Conditioners (PTACs)

 for  

your comfort conditioning requirements. PTAC units are 

thru-wall combination cooling and heating units, which 

provide an efficient, room-by-room source for comfort 

conditioning of your living environment. 

ICE AIR PTAC units are built to a high standard of 

quality and reliability, employing commercial grade 

components and heavy duty, galvanized sheet metal 

casings. With proper maintenance and usage, ICE AIR 

PTACs should provide many years of efficient, quiet 

and trouble-free comfort.

To enhance the use of your ICE AIR equipment, you 

will want to read and carefully follow all of the 

instructions contained in this Operating & Maintenance 

Manual. We recommend that you pay special 

attention to the Safety & Operation information 

section at the beginning of this Manual, and to the 

various safety advisories throughout this Manual.

Please retain this manual for your future reference. 

We suggest that you retain it with other important 

documents and product manuals. The information 

contained within this manual, unless noted herein, 

applies to all ICE AIR PTAC models. If your unit has 

optional features, they will be explained in a separate 

instruction sheet specific to that option.

On behalf of ICE AIR, and our network of distributors 

and dealers, we are happy to welcome you to our  

base of satisfied customers!

SAFTEY & OPERATION

FOR SAFE AND OPTIMAL ENJOYMENT OF YOUR ICE 

AIR PTAC UNIT, PLEASE READ THE FOLLOWING 

CONSUMER SAFETY AND OPERATING NOTES 

CAREFULLY BEFORE OPERATING YOUR EQUIPMENT!

• 

This unit MUST be serviced only by professionally 

trained, qualified technicians. Do NOT attempt to 

maintain or service this unit on your own – severe 

injury and death can occur from electric shock,  

moving parts, and other hazards. 

• 

Our ICE AIR units must each be wired on an  

individual, dedicated electrical circuit with  

the correct voltage and proper amperage  

(capacity) to match the unit nameplate  

requirements. 

• 

Each unit’s electric circuit must have a proper  

overcurrent protection device, employing an  

approved circuit breaker or fuse of the proper  

rating under NEMA and local building codes. 

• 

Every unit contains refrigerant within a sealed and 

pressurized refrigerant system. This system must 

not be opened or tampered with and any refrigera-

tion system repairs MUST be carried out by trained 

technicians. Refrigerant must be properly handled 

and recycled per EPA regulations and guidelines. 

Your ICE AIR unit must be properly installed and  

commissioned to operate correctly. Improper unit  

installation, adjustment or commissioning, and / or  

improper heating system installation and connection  

can lead to equipment malfunction and hazardous  

operating conditions, and may void your warranty.  

If you have any doubt about the proper installation  

of your PTAC unit, please contact your property  

manager at once to have a qualified technician  

inspect the equipment.  

LOCATION

MODEL #

SERIAL #

Living Room

Master Bedroom

Bedroom

Dining Room

We recommend that you record the following 

information about your ICE AIR PTAC products: 

Summary of Contents for RSAN













Reviews: