5) Pour 0.8L recommended oil into the engine. Start
the engine, let it run at idle speed for 2-3 minutes,
shut off the engine and wait for a minute, check
whether the oil is at upper level mark. If the oil level
is below the upper level mark, add the oil until it
reaches the upper level mark.
NOTES:
1) Check oil filler and oil drain bolt carefully to
avoid dripping.
2) Engine oil should be replaced frequently when
riding in dusty area.
3) Please use the oil which we recommend in the
“
FUEL AND ENGINE OIL
” item.
CARBURETOR:
The stable function of carbureting is the basic
request for a engine, the carburetor is set for the best
calibration in the factory. Do not attempt to alter its
setting. There are two items of adjustment, however,
under your care: the idle speed and the gap of throttle
cable.
BRAKES
This motorcycle has hydraulic disc front and rear
brake. Brakes are items of personal safety and should
be properly adjusted. We suggest that you should
entrust Zhenhua dealer with this check.
27
Summary of Contents for PST150-19N
Page 8: ...Please write down the numbers here for reference Frame NO Engine NO PARTS LOCATION 6 ...
Page 9: ...7 ...
Page 10: ...8 ...
Page 40: ......