WARNING:
Do not make the fuel flow all ground, it should be
put into containers. Keep the fuel off the hot engine
and exhausting pipe. Keep away from fire or fire
source or hot source while performing the test.
1) Remove the spark plug and connect high-tension
lines.
2) Fasten the spark plug on the motorcycle. Turn the
ignition switch on “ON” position and press down the
button to start it. If the ignition works well, there will
be sparks between spark plug play. If there is no
spark please contact Zhenhua authority repair station.
WARNING!
Don’t let the spark plug to be near spark plug to
be near spark plug opening aperture in cylinder head,
because the fuel vapor in cylinder can ignite causing
fire.
For reducing the possibility of electronic
breakdown. Metal parts of spark plug should be
close to the metal parts of frame without paint.
For preventing from the possibility of electronic
breakdown. People should avoid processing this
checking, who has heart disease or heart pacemaker.
ENGINE IMPETUS IS NOT SUFFICIENT
1: check for fuel supply system of fuel tank.
2: check for ignition timing of ignition system.
3: check for engine idle speed.
CAUTION:
Before servicing, you are strongly recommended
to contact Zhenghua authorized service center. If
your motorcycle is valid in guarantee period,
servicing by yourself may affect your advantage of
guarantee.
33
Summary of Contents for PST150-19N
Page 8: ...Please write down the numbers here for reference Frame NO Engine NO PARTS LOCATION 6 ...
Page 9: ...7 ...
Page 10: ...8 ...
Page 40: ......