32
the reverse gear is where standard position
RUNNING BACK position
When the reverse gear stay the position,
the motorcycle will move back.
WARNING:
Mustn’t use the reverse gear when the motorcycle
is running front, or rider will get pain.
TROUBLE-SHOOTING
If you can’t start your engine, please check in as the
follows steps
1) There is not enough fuel in the tank
2) Whether the fuel has flows into carburetor from
fuel system.
3) If the last step has been verified, please check the
igniting system.
WARNING:
Do not make the fuel flow all ground, it should be
put into containers. Keep the fuel off the hot engine
and exhausting pipe. Keep away from fire or fire
source or hot source while performing the test.
1) Remove the spark plug and connect high-tension
lines.
2) Fasten the spark plug on the motorcycle. Turn the
ignition switch on “ON” position and press down the
button to start it. If the ignition works well, there will
be sparks between spark plug play. If there is no
spark please contact Zhenhua authority repair station.
WARNING!
Don’t let the spark plug to be near spark plug to
be near spark plug opening aperture in cylinder head,
because the fuel vapor in cylinder can ignite causing
fire.
For reducing the possibility of electronic
