ICE COBOTICS ICE USA i15B, Operator'S & Parts Manual

6

ICE i15B

OPERATOR MANUAL

FOR SAFETY

:  

Do not operate machine unless

operator manual is read and understood

.

PRE-OPERATION

1. IMPORTANT:  

To prevent vacuum system from 

clogging, sweep and dust-mop floor.

2. 

Make sure battery is charged.

3.

Check that the brush and squeegee blades are 

installed.

SCRUBBING FLOORS
FOR SAFETY:  Before Operating machine,follow 

safety guidelines concerning wet floors.

          WARNING: Fire or Explosion Hazard, Do 

Not Use or Pick Up Flammable Materials.

          WARNING: Spinning Brush. Keep Hands 

Away.
 1. 

Pull  the handle adjustment lever and adjust           

the handle to a comfortable operating height.

Release the lever to lock the position. 

2. 

Press the main power switch to the on ( I ) 

position. 

3. 

Press the vacuum switch to the on ( I ) position.

4. 

To begin scrubbing,first press the safety switch 

(1),pull the start triggers(2) and push or pull the 

machine in either direction .

5. 

For heavily soiled areas, use the double scrub 

method. First scrub the soiled area with the 

vacuum switch turned off then scrub the area a 

second time with vacuum switch turned on.

UNCRATING MACHINE

Be sure and check packing carton for any damage. 

Immediately report any damage to carrier. Check 

the contents of package to ensure that the 

following items are included: 

•  Machine

•  2-12V Batteries

•  Squeegee assembly

•  Battery Charger

•  Pad Driver

•  Brush 

INSTALLING BATTERIES

The batteries are already in the machine upon 

delivery; However you will need to connect the 

cables to the battery posts.

          WARNING: Fire or Explosion Hazard.

Keep sparks and open flames away! Keep 

battery compartment open when charging.

1. 

Turn off the machine.

2.  Lift the Recovery tank (see machine 

components, p5 item #2) to access the battery 

compartment.

MACHINE SET UP & INSTALLATION

MACHINE OPERATION