4
SET-UP / TESTING / MAINTENANCE
SAFETY PRECAUTIONS
IMPORTANT: FAILURE TO FOLLOW THESE DIREC-
TIONS CLOSELY COULD CAUSE SERIOUS DAMAGE
TO YOUR GAME.
WARNING: WHEN INSTALLING THIS GAME, A 3
PRONG GROUNDED RECEPTACLE MUST BE USED.
FAILURE TO DO SO COULD RESULT IN SERIOUS IN-
JURY TO YOURSELF OR OTHERS. FAILURE TO USE
A GROUNDED RECEPTACLE COULD ALSO CAUSE
IMPROPER GAME OPERATION, OR DAMAGE TO THE
ELECTRONICS.
DO NOT DEFEAT OR REMOVE THE GROUNDING
PRONG ON THE POWER CORD FOR THE SAME REA-
SONS AS GIVEN ABOVE. USING AN IMPROPERLY
GROUNDED GAME COULD VOID YOUR WARRANTY.
GAME SET-UP
BEFORE PLUGGING THE GAME IN, OR TURNING IT
ON, BE SURE THE GAME HAS BEEN SET TO THE
PROPER VOLTAGE. YOUR GAME SHOULD COME
PRE-SET FROM THE FACTORY CORRECT VOLTAGE,
HOWEVER IT IS A GOOD IDEA TO CHECK THE A.C.
WALL RECEPTACLE VOLTAGE BEFORE PLUGGING
THE GAME IN.
ASSEMBLY INSTRUCTIONS
1. Carefully unbox the game from its packaging.
2. Using the supplied keys, unlock the front door of
the cabinet.
3. Cut all tie wraps holding the wagon assembly and
crane in place.
4. Plug the game into a three prong grounded re-
ceptacle. NOTE: The appliance must be posi-
tioned such that the plug is accessible during use.
5. The game is now ready for start up.
TESTING
After the initial setup, it is time to test your game for
proper operation.
1. Locate the game in its permanent location.
2. Be sure the game has been properly plugged into
a 3 prong grounded outlet, and that the recepta-
cle is in good working order.
3. If using an extension cord, be sure it is a 3 prong
grounded type of at least 16Ga.
4. Verify that the game is set up for the proper volt-
age, and turn the power to the game on.
5. The game will run through a test mode at every
startup. See test mode explanation in the pro-
gramming section for details.
6. Insert coins/bills into the machine at least ten
times into the coin mech/bill acceptor to assure
proper operation
7. Check the credit and prize counters for proper
operation.
8. Check game volume during busy time at location
to set it at the proper level.
CLEANING
Regular cleaning of this game will keep it looking new,
and greatly enhance its appeal.
Clean the windows of your MINI CRANE with a standard
window cleaner such as Windex®
Clean the cabinet sides with a good cleaner such as
“Fantastic” or “409” and a soft rag. A mild soapy solution
can be used. You may use a furniture polish when fin-
ished to protect the game and make it look more attrac-
tive,
NOTE: DO NOT USE ALCOHOL, THINNERS OF ANY KIND,
OR PINBALL PLAY FIELD CLEANERS ON ANY OF THE CABI-
NET SURFACES ESPECIALLY THE DECALS.
IF YOU HAVE ANY QUESTIONS OR COMMENTS REGARD-
ING INSTALLATION OR PROPER FUNCTION OF YOUR
GAME, PLEASE CALL OUR SERVICE DEPARTMENT AT 1-
716-759-0360
