Product Description
CD40030/CD40022
All models consist of a plastic lined, insulated hopper mounted to a metal base. The hopper
contains a 15 blade plastic dispense wheel and a stainless steel sweep arm. The top front of
the hopper has a removable door to facilitate maintenance and cleaning of the hopper without
removal of the ice machine.
The dispense wheel and sweep arm rotate when the ¼ HP dispense drive motor is actuated.
The drive motor’s actuation is controlled by the agitation timer or the vend switch. When the
ice dispense chute is pushed back it moves the actuation lever up. The actuation lever
releases the chute door and pushes the vend switch arm up. When the vend switch arm has
moved a preset distance the vend switch contacts close, providing power to the dispense
drive motor. Ice is delivered to the top end of the ice chute by the dispense wheel and it
slides down the chute to the container below. The container rests on a grill, the grill’s
openings are over the ice catch pan, and any spilled ice goes there. The grill has a flange at
the front to help contain the ice if it spills during vending.
Page
6
After the ice dispense chute is released, the ice chute door closes to stop ice flow. Ice in the
chute will eventually melt. Melted ice water is routed to the drain through a hose
attached to the bottom of the chute. Spilled ice is contained in an
insulated ice catch pan. Melted ice water from the ice catch pan is
routed to the drain. User debris is kept away from the drain in the
catch pan by a slotted shield.
The side and front exterior panels are stainless steel.
The vending area and top panel are made of
plastic.
Coin / Token Model
The coin op model’s operation is identical to the
basic operation described above with the exception
that no power is provided to the vend switch until the
coin mechanism has activated the vend timer. The
vend timer then allows the vend switch to be
activated for a set time, during that time the user
must dispense the ice. A green “ready” light over
the vending
area will glow when the vend timer is
armed and ready for dispensing.
Catch Pan
Drive motor
Dispense Wheel
Chute
Bin
