background image

ELEVATION SERIES

INTRODUCTION

1

Energy Efficiency

Ice-O-Matic has partnered with ENERGY STAR since 2004 to ensure our customers receive the most 
efficient ice machines for your investment dollar. Ice-O-Matic is committed to the continuous 
improvement in both energy efficiency and productivity thereby delivering the best value in energy 
efficient ice machines money can buy. 

For a detailed list of ENERGY STAR qualified Ice-O-Matic ice machines, go to:

http://www.iceomatic.com/Products/Sales-Literature/

Freight Claims 

Inspect Promptly

This merchandise has been carefully inspected 
and packed in accordance with the carrier’s 
packing specifications. Responsibility for safe 
delivery has been assumed by the carrier. If 
loss or damage occurs, you as the consignee 
must file a claim with the carrier and hold the 
container for carrier’s inspection.

Visible Loss or Damage

Any external evidence of loss or damage must 
be fully described and noted on your freight 
bill or express receipt and signed by the 
carrier’s agent. The claim should be filed on a 
form available from the carrier.

Concealed Loss or Damage

If loss or damage does not appear until 
merchandise has been unpacked, make a 
written request for inspection by the carrier 
within 5 days of the delivery date, then file a 
claim on a form from the carrier.

FILE CLAIMS WITHOUT DELAY

DO NOT RETURN DAMAGED GOODS 

TO ICE-O-MATIC

How to use this Manual

Ice-O-Matic  provides this manual as an aid to the service technician in installation and maintenance of the 

CIM Series

 cube ice machines. Do not attempt to perform installation, start-up or maintenance unless you 

have read and fully understand this manual.

Ice-O-Matic ice-makers and dispensers are not approved for outdoor installation.

Air and water cooled ice machines are hermetically sealed and contain fluorinated greenhouse gas 

R404A (GWP 3922) 

For a Service Provider, please reference our “Find a Service Technician” tab at www.iceomatic.com            

Keep this manual for future reference

The CIM Series Service Parts Manuals are available separately.

WARNING

Always disconnect electrical power and shut off water supply whenever maintenance or repairs are 

performed on the ice machine and related equipment

CAUTION 

Always wear protective eyewear whenever maintenance or repairs are performed on the ice machine 

and related equipment

Ice-O-Matic Warranty

Every Ice-O-Matic ice maker is backed by a warranty that provides both parts and labor coverage. To view 

the warranty details, register products, or check your warranty status visit the “Warranty and Water Filter 

Registration” page on www.iceomatic.com

Summary of Contents for CIM 300


















Reviews: