EMF 1106 Series
Flake ICE Maker
EMF 1106 on a B55 Bin
ICE-O-Matic is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
Produces up to 1152 lbs. (524 Kgs.)* of ICE per day
Constructed from sturdy, corrosion-resistant
300 series stainless steel
Only 16 inches wide
Available with an air-or water-or
remote-cooled condenser
*Rated at 70 ° (21°) Air / 50° (10°) Water
Problem
ICE-O-Matic Tough
Constructed with a brass evaporator and rugged stainless
steel transport system enclosed in polyurethane insulation
Solution
Operating Environments
Built to last?
Tight-Fitting Spaces
Kitchen space utilization
Maximum ICE
Maximum ICE production in a minimum amount of space :
• No additional side clearance required on a
30 inch wide bin
• Maximum ICE production in a 16 inch cabinet
• Works on all industry dispensers and bins
Dirty Air Filter
Forget to change the air filter?
Filter-Free Air
No air filter to change
Dependable ICE
ICE-O-Matic Flake ICE Makers remove excess water by
pushing the flaked ICE through an extrusion process.
The result is high quality flaked ICE which is ideal for
medical, supermarket or restaurant applications.
Poor Ice Quality
Ice is too wet and soft
