Specifications and Limitations
IOD150, IOD200, IOD250
Limitations:
Must meet the same limitations as the cuber installed on top of it:
50
°
F. air minimum
100
°
F. air maximum
Must be installed indoors.
Must allow at least 6-inch clearance at the rear and both sides when using an
air-cooled
ice
machine.
Must allow space for the utility connection at the back.
Must have a drain.
Options (Field Installed) (*Required)
*
Thermostatic Bin Control Kit (22 Inch Ice Series) Part Number 1051134-01
*
Thermostatic Bin Control Kit (30 Inch Ice Series) Part Number 1051020-02
Manual Water Glass Filler Kit
Part Number KWGFID
*Ice Machine Adapters
*22
inch
cuber
Part
Number
KBT15022
*22 inch machine on a 30 inch dispenser
Part Number KBT25022
*30
inch
cuber
Part
Number
KBT25030
Dispenser Specifications
Storage Basic
Min. Circuit
Model Number Capacity (lbs)
Electrical Actuation Ampacity Max. Fuse Size
IOD150
150
115/60/1 Lever
3.0
15
IOD200
220
115/60/1 Lever
3.5
15
IOD250
250
115/60/1 Lever
3.5
15
Dimensions (Inches)
Model Number Width
Depth
Height (Excludes 4” Legs)
IOD150 22
inches
30
inches
35
5/8
inches
IOD200 30
inches
30
inches
35
5/8
inches
IOD250 30
inches
30
inches
39
5/8
inches
Note: Counter top 4 inch legs are included with the dispenser.
Ice-O-Matic ice machines are not designed for outdoor
installations.
Machine requires voltage indicated on rating nameplate. Failures
caused by improper voltage are not considered factory defects.
Extended periods of operation at temperatures exceeding limitations
constitutes misuse under the terms of the Ice-O-Matic Manufacture’s
Limited Warranty, resulting in a loss of warranty coverage.
Specifications and design are subject to change without notice.
The IOD150, IOD200 and IOD250 carry a 2-year Parts warranty
and a 1 year Labor Warranty.
These dispensers are designed to dispense cubed ice only.
Flaked ice will not work.
The dispenser will agitate for 4 seconds every (1) hour.
Page
2
