18
OPERATOR MANUAL
/ / -OB /
Installing Pad Driver Or Brush
Ensure that the machine is turned off.
Step down on the scrub head lift pedal
(see machine components, item #26) to
raise the scrub head off the floor.
If using a Pad Driver, first attach the ap-
propriate pad to the pad driver surface.
Turn the brush motor hub until the slot
with the spring clip is visible through the
scrub head window.
1.
2.
3.
4.
Mount the pad driver or brush to the
brush motor hub by lining up the three
studs with the three holes in the brush
motor hub. Once in the holes, rotate the
driver toward the spring clip to lock the
pad driver into place.
If necessary, press down on the motor
hub lock pin (see machine componts, item
# 10) to lock motor hub in place.
5.
Figure 5
Figure 6
