2
Baxall ICE Series Fixed Dome Cameras
PRODUCT SAFETY
•
Installation and servicing is only to be carried out by suitably qualified and experienced
personnel.
•
Mains cameras contain hazardous voltages.
•
Do not remove covers as there is a risk of injury or death by electric shock.
•
Only power low voltage dome cameras from a class 2 isolated power supply.
This camera range is designed for use in general purpose CCTV applications and has no other purpose. Only
operate your camera between the temperatures of -10
O
C and +50
O
C. Do not operate your camera outside its
specified power supply range. Cameras must only be used in clean, dry, dust-free environments unless housed
in a suitable protective housing to IP65 or better.
APPROVALS
The manufacturer declares that the product supplied is compliant with the provisions of the EMC Directive 89/
336 EEC, the Low Voltage Directive 72/23 EEC and the CE marking directive 93/68 EEC and associated
amendments. A “Declaration of Conformity” in accordance with the above directives is held on file with the
manufacturer.
CAMERA CARE
In order to avoid damaging your dome camera, note the following points:
1)
Remove all packaging inserts and the protective film from the dome cover before using the
camera.
2)
Do not touch the image surface of the sensor. If the sensor is accidentally touched, only clean it
using isopropanol.
3)
Do not expose the camera sensor to very bright light over a long period of time as this may
cause damage to the CCD. The camera and lens setup must be correct to avoid possible
damage due to long term exposure to bright light. A lens with an automatic iris is recommended
under these conditions.