Operation of Wet & Dry Vacuum
10
ICE IW35
OPERATOR
Read operators manual thoroughly prior to operating or servicing
this machine.
Dry Operation
The use of a cloth filter bag and a dust bag will improve levels of filtration
and is recommended. Always ensure that the container is emptied of any
liquid before using for dry pick-up and that the cloth filter is in a clean and dry
condition.
Empty the tank when you notice that the performance is reducing. Switch off
the machine and remove the power head. Shake the filter in order to remove
debris. This should be done while the hose is still connected to avoid dust
exiting from the open dirt container connection. After shaking the filter, wait
a few moments for the dust to settle. Remove filter from machine and empty
container. If the filter’s surface appears to be heavily soiled, it is advisable
to brush the filter material clean with an ordinary soft household brush. This
ensures continued peak performance. Having emptied container, replace filter
and power head. You are now ready to start again.
Wet Operation
The float valve assembly must be used at all times for wet pick-up. Always
ensure that the container is emptied of any dry dust before using the machine
for wet pick-up.
Always be sure to use a wet pick-up nozzle with rubber blades.
During wet pick-up operation the floor is left almost entirely dry.
When there is no longer liquid to be collected or the machine is full, switch off
the power head. Remove the power head and float valve assembly.
Empty the liquid from the container. Replace the float valve assembly and
power head.
You are now ready to start work.
