Ice IW80, Operator'S & Parts Manual

    MACHINE SET UP & INSTALLATION

ICE IW80

 6

           OPERATOR

UNPACK MACHINE:

Be sure and check packing carton for any damage. Immediately report any damage to carrier. 

Be careful not to let machine vibrate while carrying, Check contents of package to ensure that 

the following items are included:  machine, accessories.

1) Sweep the outside of the machine.

2) Make sure the voltage of machine conform to local voltage.

3) Check that float shut-off or dust filter is properly installed.

MACHINE SET UP & PRE-OPERATION CHECKS:

MACHINE OPERATION

Do not operate machine unless you have read and understood this manual.

1) Make sure that the tank is emptied of any dry dust before using the machine for wet pick-up.

2) Remove the power head, check to make sure that the float shut-off is installed and fully functional.

3) Install the power head back and connect vacuum hose to inlet on the machine body.

4) Attach appropriate accessory tool for the job to be completed.

5) Make sure the switches are in the OFF position, then plug power cord into a grounded outlet.

WET OPERATION

NOTE: The float shut-off should be installed like the picture below.

T h e   f l o a t   s h u t - o ff 

should be installed like 

this.