ICE RS26, powered by Brain OS
|
Gen2, v1.1217 – Content Subject to Change
30
Brain Corporation
DELETING A ROUTE
There are two ways to delete a route.
OPTION 1
1. Select Service on the user interface LCD screen.
2. A new menu of options will appear. Choose “ Delete Route”.
3. The list of home location codes that have been saved to memory
will appear. Select the home location code that is to be edited.
4. From the list of saved cleaning routes now displayed,
highlight the route to be deleted and select “Delete”.
OPTION 2
1. Drive the Brain-enabled scrubber to the home location code that’s to be edited.
2. From the Service menu select “Route Deletion.”
3. The routes associated with that specifi c code will appear on the user LCD screen.
4. Highlight the route to be deleted and select “Delete.”
RUNNING AN AUTONOMOUS CLEANING ROUTE
1. Position the Brain-enabled scrubber in front of the home location code.
All operations should begin and end at the home location code.
2. If the Brain-enabled scrubber is not positioned properly in front of the
home location code, a message will appear on the user interface LCD screen
stating “Drive to Scan My Home Location.” The robotic scrubber cannot not
scan the code if the Brain-enabled scrubber is not properly positioned.
3. When the Brain-enabled scrubber sees the home location code, it will
be visible via the live video image on the user interface LCD screen and
scanning animations will appear on the LCD screen. A message will appear
on the user interface LCD screen stating “Scanning Home Location.”
4. Once the Brain-enabled scrubber completes scanning the
home location code, a “Success” message appears.
5. Select a cleaning route via the user interface LCD
screen by selecting the desired route.
6. Step off of the machine and secure the safety straps by pulling them from their
housing and clasping them to the front screws on the sides of the machine.
7. Walk to the rear of the machine and press the fl ashing
blue button to begin autonomous operation.
8. As the machine starts autonomous operation, inspect it to ensure proper cleaning
function (i.e. deck and scrubbing function, squeegee function, squeegee adjustment,
rear squeegee water pickup, side skirt wiping, etc.)
In summary there are
3
important and simple steps to remember: Once at the home location code, select
“choose a route”, then select the route you wish to clean, lastly press the blue button.
It is as easy at 1-2-3!
NOTE
After a brief pause, the machine will signal that it’s about to op-
erate by flashing the yellow warning light and sounding its horn.
