27
ICE RS26L+ / RS32L+
OPERATOR MANUAL
PREVENTIVE MAINTENANCE
Daily Maintenance
1.
2.
3.
Remove pad driver/ brush and clean
with approved cleaner.
Drain recovery and solution tanks
completely and rinse out with clean
water. Visually check
the recovery tank for debris and clean
out as necessary.
Raise the squeegee assembly off the
floor and wipe it down with a damp
towel.
Be sure to store the squeegee
in the up position.
WARNING:
Before performing any maintenance on the machine,
be sure that the power is turned off, or the batteries are disconnected!
WARNING:
Repairs are to be completed by authorized service centers only. Any repairs
completed by unauthorized persons will not be covered by the warranty.
Remove the float shut-off assembly
and rinse it out with clean water.
Clean the machine with an approved
cleaner and a damp towel.
Recharge the batteries.
Check the condition of the squeegee
blade wiping edge, rotate blade if it
is worn.
4.
5.
6.
7.
Monthly Maintenance
1.
2.
3.
Clean the battery tops to prevent cor-
rosion.
Check for loose battery cable connec-
tions.
Inspect and clean the recovery tank
cover seal.
Replace it if damaged.
Lubricate all grease points and pivot
points with silicon spray and approved
grease.
Check the machine for loose nuts and
bolts.
Check the machine for leaks.
4.
5.
6.
Summary of Contents for RS26L+
