Torus 126, 380 and 500 Operator Manual
Rev AB
Equipment Safety Guidelines 2-3
Example:
Caution
Never turn off the printer by switching the AC power switch to the
Off (O) position. Before pressing the Off key, allow the printer to
complete the three and a half minute shutdown sequence. Failure in
following this procedure prevents the printer from drawing the ink
in the ink return line, back into the reservoir. This may cause the ink
to dry in the ink return line, resulting in problems when you turn the
printer on again.
Equipment Safety Guidelines
This section contains important safety guidelines pertaining to the
operation and handling of the printer and associated equipment.
Warning
Always observe the following safety guidelines when operating and
handling the printer and associated equipment.
Comply with Electrical Codes
All electrical wiring and connections must comply with
applicable local codes. Consult the appropriate
regulatory agency for further information.
Avoid Breathing Exhaust Vapors
During this operation, the printer releases fumes from
the printer exhaust tube. These fumes may be flammable
and cause a health hazard. Therefore, do not allow the
exhaust to be confined to an area that does not have
proper ventilation, or be located near a source of
ignition. Printer exhaust fumes are generally heavier
than air, so keep all sources of ignition away from low
