Torus 126, 380 and 500 Operator Manual
Rev AB
Print Position Adjustment 5-11
Print Position Adjustment
To adjust the position of the print with reference to the front edge of the
box, do the following tasks:
1
Navigate to
Tools > Setup > Printhead
in the
Home Page
. The
Printhead
setup page appears (Figure 5-14).
2
Touch the
Registration Delay
icon
.
Enter the new print position (in
millimeters) with the keypad (Figure 5-15).
Follow any of the below methods to make the adjustments:
• Touch the
and
icons to make small adjustments in the
position.
• Touch the data entry pad icon and use the pad to enter a new number
(Figure 5-16 on page 5-12).
• Enter the
Min
,
Max
or
Default
values (Figure 5-17 on page 5-13).
Figure 5-14: Printhead Setup Screen
Tools
