Zodiac Plus Operator Manual
Rev AA
Starting the Printer 3-5
Starting the Printer
When the printer is switched on, the printer state changes from the
SHUTDOWN to the STARTING UP and then to the OFFLINE state.
Under this condition, all the external electrical inputs are ignored and
the print sensor signals will not trigger a print. This enables you to
check if the line and the printer are ready for production, before you
switch the printer into the RUNNING state to start printing.
To switch the printer to the RUNNING state, touch the Start button
(Figure 3-6).
Figure 3-7 displays the CLARiTY home page with the printer in the
RUNNING state.
Note:
If the printer has a fault or a warning, RUNNING will be replaced
with FAULT or WARNING. If FAULT is displayed, you must fix the
problem before trying to print. Refer “Clearing a Fault Message or Warning”
on page 5-2 for further information
.
Start Button
Figure 3-6: Start Button
Figure 3-7: CLARiTY Home Page in the Running State
