background image

Please ensure that the required voltage of the compressor is being supplied at all times. 
Low or high voltage can detrimentally affect the refrigeration unit and thereby void its 
warranty. 
All units should be plugged into a grounded and properly – sized electrical outlet with 
appropriate over current protection. Please refer to the electrical requirements on the 
unit serial tag located inside the unit. Please make sure that your unit has its own 
dedicated outlet. Do not use an extension cord. 
 

REGULAR MAINTENANCE 

 
 

CLEANING THE CONDENSER COIL 

 
For efficient operation, it is important that the condenser surface be kept free of dust, 
dirt, and lint. Iceblue recommends cleaning the condenser coil and fins at least once 
per month. Clean with a commercial condenser coil cleaner, available from any 
kitchen equipment retailer. Or just use a brush and soft cloth. 
 

CLEANING THE FAN BLADES AND MOTOR 

 
If necessary, clean the fan blades and motor with a soft cloth. If it is necessary to 
wash the fan blades, cover the fan motor to prevent moisture damage. 

 
CLEANING THE INTERIOR OF UNIT 

 
When cleaning the cabinet interior, use a solvent of warm water and mild soap. Do 
not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the 
stainless steel surface. 
 
Wash door gaskets on a regular basis, preferably weekly. Simply remove door gasket 
from the frame of the door, soak in warm water and soap for thirty (30) minutes, dry 
with soft cloth, and replace. Check door gaskets for proper seal after they are replaced. 
 
Periodically remove the shelves and pilasters from the unit and clean them with mild 
soap and warm water. To remove the pilasters, firstly remove the shelves and shelf 
clips, then, unscrew the pilaster with a screwdriver and remove. 
 

HIGH ACIDITY 

 
Items that are of high acidity should not be stored in the fridge because it will corrode 
piping around the water box and condensing unit.   
 
 
 
 
 
 
 

WARNING 

DISCONNECT POWER CORD BEFORE 

CLEANING ANY PARTS OF THE UNIT 

Summary of Contents for LSZ Series








Reviews: