IceCure Medical Ltd.
DSR3000000 rev.L
Confidential
User Manual
38
IceSense3™
Warning
Do not rely solely on the temperature sensor measurement. Always monitor the procedure using
Ultrasound or other appropriate imaging system.
The temperature sensor and its components are depicted in the following figure.
Figure 25: The temperature sensor and its components
1.
Temperature sensor needle
2.
Temperature sensor handle
3.
Temperature sensor cable connector
4.
Temperature sensor connection site
If you decide to use a temperature sensor, connect it per the following instructions while
maintaining sterility:
1.
Remove the temperature sensor from the sterile package.
2.
Connect the cable connector to the panel connector on the upper right corner of the main
chassis while keeping the connector key facing the groove.
3.
The measured temperature from the sensor tip will appear on the right lower corner of the
screen.
4.
Under imaging guidance, insert the tip of the temperature sensor into the tissue you want to
measure.
5.
At the end of the procedure, gently remove the temperature sensor from the tissue and
discard it.
1
2
3
4
