IceCure Medical Ltd.
DSR3000000 rev.L
Confidential
User Manual
40
IceSense3™
3.4
Operational details
This section describes the operational actions of the IceSense3™cryoablation system that support
the functional operations described in Chapter 5.
Order liquid nitrogen in advance based on projected case load.
Industrial grade liquid nitrogen should be delivered to the user’s site in a standard cryogenic
Dewar.
Follow standard guidelines for the safe handling and storage of the Dewar.
Warning
Liquid nitrogen may cause serious injury or burn if handled improperly. Local laws and safety rules
regarding the maintenance and handling of liquid nitrogen Dewars should always be observed.
Maintenance of liquid nitrogen should be performed by authorized personnel only.
Care must be taken when filling the system Dewar.
Standard guidelines for safe handling and storage of liquid nitrogen should be followed. These
guidelines are available from the supplier.
3.4.1
Starting the system
Before turning on the system, confirm the following conditions:
Previously used cryoprobe, temperature sensors and sleeves have been removed and the
system has been cleaned of any residue and dried off.
The system is connected to the electrical outlet.
To switch the system ON, turn on the mechanical button at the back of the system. The touch screen
will turn on and the following screen will appear:
