IceCure Medical Ltd.
DSR3000000 rev.L
Confidential
User Manual
50
IceSense3™
5.2.6.1
Change workflow
IceSense3™ cryoablation system supports 2 alternative workflows, allowing the user to select a
treatment protocol before preparing the system (filling Nitrogen, connecting probe, and testing it) or
to prepare the system first and then select a treatment protocol.
To set the preferred workflow, press Settings (in the main menu), followed by “Change Workflow”.
Select the preferred workflow and press Back.
Choosing the “Change Workflow” icon will load the screen below enabling two workflow
alternatives: users can either Select Treatment mode first then Prepare System for use, or Prepare
System for use then Select Treatment mode.
Figure 38: The Change Workflow screen with two alternative workflow settings
5.2.6.2
Log-in to Technician mode
Choosing the “Technician Mode” icon will load a Technician Mode entry screen that is used for
maintenance of the system. The technician mode can only be accessed by an IceCure Medical
authorized technician and is restricted by a password.
Warning
Never enter the Technician mode screen. Only an IceCure technician or authorized representative
is allowed to use the technician mode for maintenance or repair of the system.
