MOUNTING
HELMET
FOR MORE INFORMATION:
SUPPORT@ICEDOT.ORG
Your ICEdot Crash Sensor comes with one helmet mount.
Additional mounts may be purchased. The helmet mounting
clip should go on the top rear of the helmet as shown in the
image below. You can attach the mounting clip by using the
3M adhesive tape and applying it directly to the hard outer
shell of your helmet, or by using the supplied zip ties and
running them through the slots on the mounting clip and
attaching it through the vent holes of your helmet, cutting
away excess. Always attach the mount so that the USB
plug port is facing the back of the helmet.
EXAMPLE:
Mounting clip with arrow identifies USB plug
EXAMPLE:
Helmet with the Crash Sensor attached
IMPORTANT:
THE CRASH SENSOR SHOULD BE FIRMLY ATTACHED
TO YOUR HELMET WITH NO MOVEMENT OR BOUNCING.
ANY MOVEMENT OF THE SENSOR MAY CAUSE
VIBRATIONS WHICH CAN RESULT IN FALSE READINGS.
USB Plug
