Installation
14
9. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
feet. Transfer the lower door to the proper position.
10
.
Reverse the middle hinger by 180
degree, then transfer it to the left side
properly. Position the middle hinger pin in the upper hole of the lower door,
then tighten the bolts.
1
1
.
Place the upper door back on. Ensure the door is aligned horizontally and
vertically so that the seal are closed on all sides before finally tightening the
top hinge. Then insert the top hinge and screw it to the top of the unit and
then fix hinger cover (in poly bag) by screw.
12
.
Fix the screw cover.