Safety Information
6
to the retailer where you purchased the appliance. In that case retain
the packaging.
•
It is advisable to wait at least four hours before connecting the
appliance to allow the oil to flow back in the compressor.
•
Ensure your appliance has adequate air circulation, failure to do this
may lead to overheating. To achieve sufficient ventilation, follow the
instructions relevant to installation.
•
Wherever possible the spacers of the product should be against a wall,
to avoid the warm parts (compressor, condenser) touching any surfaces
and causing possible burning.
•
The appliance must not be located close to radiators or cookers.
•
Make sure that the mains plug is accessible after the installation of the
appliance.
Service
•
Any electrical work required to service the appliance should be carried
out by a qualified electrician or competent person.
•
This product must be serviced by an authorised Service Centre and
only genuine spare parts must be used.
Energy Saving
•
Do not put hot food in the appliance.
•
Do not pack food close together as this prevents air circulation.
•
Make sure food doesn’t touch the back of the compartments.
•
If electricity goes off, do not open the doors.
•
Do not open the doors frequently.
•
Do not keep the doors open for too long.
•
Keep the temperature at a moderate level during normal weather
conditions.
