class indicated on the rating plate of appliance:
for refrigerating appliances with climate class:
•
extended temperate: this refrigerating appliance is intended to be used at
ambient temperatures ranging from 10
℃
to 32
℃
; (SN)
•
temperate: this refrigerating appliance is intended to be used at ambient temperatures.
ranging from 16
℃
to 32
℃
; (N)
•
subtropical: this refrigerating appliance is intended to be used at ambient.
temperatures ranging from 16
℃
to 38
℃
; (ST)
•
Tropical: this refrigerating appliance is intended to be used at ambient temperatures
ranging from 16
℃
to 43
℃
; (T)
Location
The appliance should be installed well away from sources of heat such as radiators, boilers,
direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To
ensure best performance, if the appliance is positioned below an overhanging wall unit,
the minimum distance between the top of the cabinet and the wall unit must be at least
50mm. ideally, however, the appliance should not be positioned below overhanging wall
units. Accurate leveling is ensured by one or more adjustable feet at the base of the cabinet.
This refrigerating appliance is not intended to be used as a built-in appliance;
Warning!
It must be possible to disconnect the appliance from the mains power supply; the
plug must therefore be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to
your domestic power supply. The appliance must be earthed. The power supply cable plug is
provided with a contact for this purpose. If the domestic power supply socket is not earthed,
connect the appliance to a separate earth in compliance with current regulations, consulting a
qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed. This
appliance complies with the E.E.C. Directives.
Door reversibility
Before reversing the door, please prepare below tools and material: straight screwdriver, cross
screwdriver, spanner and the components included in the accessary bag:
Left Door Hinge Cover x 1
Left Aid-Closer on Upper Door x 1
Left Aid-Closer on Lower Door x 1
1.Unscrew the top hinge cover and then unscrew the top hinge.
Then lift the upper door and place it on a soft pad to avoid scratch and damage.
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate.
Installation
12
