Remove the screws from the upper-hinge assembly then lift and remove
the door from the lower hinge assembly. Place it carefully on a soft pad to
avoid scratching.
Now remove the hinge pin from the upper hinge, turn the hinge over and
refit the pin into the same hole.
Remove the screws from the lower hinge and foot assembly. Now remove
the hinge pin from the lower hinge, turn the hinge over and refit the pin
into the same hole.
Remove both of the feet and fit the left foot onto the right-hand side.
Now fit the lower hinge and right-foot assembly onto the left-hand side.
Tighten the screws.
Refit the door onto the lower hinge assembly and then fit the top hinge into
the top of the door. Tighten the screws that hold the top hinge in place.
Ensure that the door is correctly aligned and that it seals correctly. If the
door requires further alignment, slacken off the screws, re-align the door
and retighten the screws.
Re-fit the appliance top cover.
10
Summary of Contents for RK198WE
Page 28: ...CKICK V02...
