Installation
To ensure best performance, if the appliance is positioned below an
overhanging wall unit, the minimum distance between the top of the cabinet
and the wall unit must be at least 50mm.
Ideally, however, the appliance should not be positioned below overhanging
wall units. Accurate levelling is ensured by one or more
adjustable feet at the
base of the cabinet.
This refrigerating appliance is not intended to be used as a built-in appliance.
WARNING!
It
must
be
possible
to
disconnect
the
appliance
from
the
mains
power
supply;
the
plug
must
therefore
be
easily
accessible
after
installation.
Electrical Connection
Before plugging in, ensure that the voltage and frequency shown on the rating
plate correspond to your domestic power supply. The appliance must be
earthed.
The
power supply cable plug is
provided with a contact for this purpose. If the
domestic power supply socket is not earthed, connect the appliance to a
separate earth in
compliance with current regulations, consulting a qualified
electrician. The
manufacturer declines all responsibility
if
the above safety
precautions are not observed.
Door Reversibility
Before reversing the door, please be prepared
with the
below tools and
materials: straight screwdriver, cross screwdriver,
spanner and components
included in the poly bag.
11
Easy
$
andle ×1
Handle Cover ×2
Screw ×2
Left Aid-Closer ×1
Left Top Hinge Cover ×1
