7
3. PACKING AND MOVING
Before unpacking the product, memorize the position of
each accessory, in case you must pack it again in the
future.
Do not lift or pull the door or the door handle during
transport and do not use it as a holder.
When moving, the device can not be tilted more than 45
degrees (the angle with respect to the vertical direction).
Please avoid strong vibrations and blows to the device
as they could affect its operation. Do not place the good
horizontally or upside down. Please place it on its base
and move it using the castors.
4. INSTALLATION
x
The refrigerator must be placed on a completely
flat surface, leave between 5 and 10 cm between
each side of the appliance and the wall, 7.5 cm
from rear wall, and leave 30 cm between the top of
the appliance and the ceiling. An incorrect location
could increase the noise of the device.
x
Choose a place that is not exposed to sunlight,
high temperature or humidity, since moisture can
cause stains.
x
REMOVE the lower panel before installation.
x
The appliance can be adjusted by rolling its two
legs in when it is unstable. Rolling clockwise