6
the camera will start capture video. It will save
a video every 3min. If no movement detected,
the camera will go back to motion detection
standby mode.
3.3.3 Stop recording: Press
“
Motion Detection
Video Recording
”
button again, the blue light
turns on, it will go back to standby mode.
3.4 Record sound
3.4.1 Turn on the camera. And press the
“
Power
”
button on the remote once to get it
into standby mode.
3.4.2 Start recording: Press
“
Sound
”
button,
the blue light will blink for twice and then
disappear, it will start recording sound.
3.4.3 Stop recording: Press
“
Sound
”
button
again, the blue light appears, it will go back to
standby mode.
3.5 View what you recorded
3.5.1 Power off the camera.
3.5.2 Connect the camera to your computer via
USB cable, a removable disk will appear, which
