2
2.
Conditions and Preparations
2.1 Insert Micro SD card
Hold golden fingers of the Micro SD Card
towards the specifications, and then insert it
into the slot.
2.2 Power on/off the camera
2.2.1 Power on: Press button B (Power Button)
for 2s, the red and yellow lights
alternately flash, it will create a hotspot
(named the camera’s UID pasted on the
camera).
2.2.2 Power off: Long press button B (Power
Button) until both light turn off.
2.3 Battery Charging
When the battery power is weak and camera is
recording, the file will be saved automatically
when the battery runs out.
To charge, use the USB cable to connect it to
your PC or adapter (DC 5V). It takes about 3-4
hours to get a full charge.
