QD-ENG-40 REV.3
- 12 -
TROUBLE SHOOTING:
Contact Ice Qube if the air conditioning system should fail to operate satisfactorily during the first year of
operation. DO NOT remove the cover without first notifying the factory.
Removal of the cover will
immediately void the warranty
.
If an operating problem should occur, please review the items outlined in the following “Trouble Shooting Check
List”. If the problem persists, obtain model and serial number before contacting Ice Qube for technical
assistance.
TROUBLE SHOOTING CHECK LIST
Model No:
S/N Number:
Voltage Rating:
Amps:
Phase:
Hz:
Is proper electrical power available at the outlet?
YES
NO
Is the power cord connected to the electrical supply?
YES
NO
Is the controller set point temperature above or below the enclosure
temperature?
YES
NO
Is the evaporator (cold air stream) blower operating?
YES
NO
Is the compressor and condenser (warm air stream) blower operating?
YES
NO
Is the enclosure door closed tightly?
YES
NO
Are all of the gaskets in place?
YES
NO
Has the condenser (warm air stream) filter been cleaned or changed
recently?
YES
NO
Is the system mounted level on the enclosure?
YES
NO
Is there adequate space within the enclosure for air flow?
YES
NO
Is there adequate space around the enclosure for air flow?
YES
NO
Have you recently added electronic equipment to the enclosure?
YES
NO
Still experiencing problems?
Call Ice Qube at 1-888-867-8234
Make sure you have your model and serial number ready before you call.
