background image

 

27 

 

 
 
 
 
 
 

Standard Warranty Policy 

 
 
Ice Qube, Inc. ("

Ice Qube

") warrants that the products manufactured by Ice Qube (the "

Products

") are free of defects in material and workmanship which impair the 

operation  of  the  Products,  under  normal  and proper  use and  service,  for a period  of  one  (1)  year  from the  date  of  shipment  FCA  from  Ice  Qube’s  facility  located  in 
Greensburg, Pennsylvania (the "

Standard Warranty

").   

 
In order for this Standard Warranty to apply, the Product(s) must be installed and operated according to and consistent with the following conditions: 
 

 

Operation within the rated voltage on the label of the Product; 
 

 

Frequency variation no greater than +/- 3 HZ from rated frequency on the label of the Product; 
 

 

Ambient temperature must not exceed operating temperature range on the label of the Product; 
 

 

Maximum cooling capacity not to exceed rating (BTU/HR) as rated on the label of the Product; and 
 

 

The Product must be installed, maintained and operated consistent with the terms and conditions set forth in the operation manual. 

 

THIS STANDARD WARRANTY DOES NOT COVER THE FOLLOWING

 

 

Ice Qube assumes no liability beyond the repair or replacement of its own Products.  In no event shall Ice Qube be liable for any incidental, special, indirect, 
consequential or similar damages incurred by any purchaser, owner, possessor, assignee or successor in interest or any other third party having any interest in 
any Product as the result of any breach of this Standard Warranty, including but not limited to loss of profit or revenues, damages for loss of use of the Products, 
damage to property, both real and personal, claims of third parties, including personal injury or death on account of use of the Products or failure of Ice Qube 
to warn against or instruct on or adequately warn against or instruct on, the dangers of the Products or the safe and proper use of the Products, whether or not 
customer has been advised of the potential for such damages. 
 

 

Ice Qube's total liability for customer's claims from any cause whatsoever, whether arising under contract, warranty, tort (including negligence), strict liability, 
products liability or any other theory of liability, will be limited to the lesser of customer's actual damages or the price paid by customer to Ice Qube for the 
Products (not including applicable taxes, duties and freight charges) that are the subject of customer's claim. 
 

THE WARRANTY SET FORTH HEREIN IS STRICTLY LIMITED TO ITS TERMS AND IS IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, EXPRESS 
OR IMPLIED, ARISING BY OPERATION OF LAW, COURSE OF DEALING, CUSTOM, USAGE OF TRADE OR OTHERWISE, SPECIFICALLY EXCLUDING 
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE. 

 

1.

 

The warranty and remedies for breach of warranty provided for in this Standard Warranty extend only to the original installation and do not cover, and Ice Qube 
will neither assume responsibility, nor be liable, for the following:  

 

 

misapplication of its Products or the erroneous selection of an inappropriate Product by a non-authorized Ice Qube representative;    
 

 

use of the Product for other than its designed purpose or operating conditions; 
 

 

operation  or  storage  in  harsh,  oily,  corrosive  or  other  abnormal  environments  without  the  proper  filtration,  sealing,  protective  coatings  and/or  weather 
protection; 
  

 

damage to the hermetic system resulting from continuous operation with dirty or clogged air filters or improper or negligent maintenance; 
 

 

use of refrigerant other than designated on the label of the Product; 
 

 

customer modification or abuse; 
 

 

shipping damage or other accidental damage (It is Ice Qube’s standard policy that freight claims are the responsibility of the customer if the Product is not 
refused at delivery); 
 

 

repair, damage or service of the Product caused by anyone except personnel authorized by Ice Qube; 
 

 

cracked or broken hermetic tubing, brazed joints or other internal damage caused by shipping or mishandling; 
 

 

damage caused by shipping units attached to an enclosure; 
 

 

any and all damage, breakage, malfunction or other like conditions or defects resulting from noncompliance with the standard  operation, care, installation, 
maintenance and use of the Product as set forth in the operation manual for such Product; 
 

 

any cause beyond the control of Ice Qube, including without limitation conditions caused by movement, settlement or structural defects of the environment in 
which the Products are installed; 

Summary of Contents for IQ700HE






























Reviews: