4
SAFETY
PRECAUTIONS
DANGER
Do not get any water or cleaning products
on the main unit or power plug.
Doing so
may cause a fire, electrical shock, heat or a short.
Doing so can cause the product to crack resulting
in injury or water damage.
Always unplug the product from the outlet
before cleaning or maintenance.
Failure to do so
could cause electrical shock. This does not apply
when using the Clean Nozzle function.
Do not do anything that could damage the
power cord or power plug.
Do not strike, yank,
twist, bend, damage heat or otherwise alter the
power cords. Do not place anything heavy, bind or
pinch the power cords. Using a damaged power
cord may result in a fire, electrical shock, heat or
short.
When cleaning or maintaining plastic
components or the supply hose, use mild dish
soap diluted with tap water and a soft cloth.
Do
not use any of the following:
Toilet cleaner, household cleaner, benzene, paint
thinner, powdered cleanser or nylon scrubbing
pads.
These items could damage or crack the plastic
and cause injury or malfunction.
These items could damage the water supply hose
and cause a water leak.
Do not use a loose or faulty electrical
outlet.
Doing so could cause a fire or
short.
Do not use any power supply other than
the one specified (USA: AC 120V, 60Hz).
Doing so could cause a fire or excessive
heat.
Do not touch the power plug in the event
of a thunderstorm.
Doing so could cause
an electrical shock.
Only use tap water or potable well water
(underground water). Do not use seawater. Do
not connect to industrial or gray water.
Doing so
may cause irritation to the skin and / or product
malfunction.
Make sure that a properly grounded (3 prong)
outlet has been installed.
Failure to install a
grounded outlet could cause electrical shock in
the event of a malfunction or short circuit. See
Grounding Instructions for full details.
DO NOT
SPRAY WATER
PROHIBITED
PROHIBITED
OBSERVE
STRICTLY
OBSERVE
STRICTLY
OBSERVE
STRICTLY
Summary of Contents for iWash S-12
Page 2: ......
