background image

16

TROUBLESHOOTING 

GUIDE

ISSUE

POSSIBLE CAUSES

SOLUTION

Seat does not work at all. 

The seat sensor is covered by cloth 

or any other object. Sensor must be 

activated by skin contact in order for 

most functions of the seat to work. 

Remove any fabric or object blocking 

the seat sensor. 

Plug is loose or poor connection.

Make sure the plug is securely 

plugged into the outlet. 

The power indicator light is off.

If the power indicator light  is off, 

press the stop button on the remote 

or side panel to turn the unit back on. 

Power is out.

This seat is fully electronic. Power 

must be on in order for seat to work. 

Spray functions not 

working.

Filter is clogged.

Clean the filter. See page 15 for 

instructions. 

Spray pressure is not 

strong enough.

Water pressure is set at lowest level.

Increase the water pressure using the 

remote control.

Filter is clogged.

Clean the filter. See page 15 for 

instructions. 

Nozzle is clogged or dirty.

Clean the nozzle. See page 15 for 

instructions. 

Spray is not warm 

enough.

Water temperature is set at lowest 

level.

Increase the water temperature using 

the remote control.

Seat is not warm.

Seat temperature is set at lowest 

level.

Increase the seat temperature using 

the remote control.

Remote control is not 

working.

Batteries are dead or inserted 

incorrectly. 

Check that the batteries are inserted 

correctly and test. Replace if 

necessary. 

Seat is unoccupied.

Most functions will not work if 

the seat is unoccupied. Make sure 

the seat sensor is being engaged. 

See Parts Identification for sensor 

location. 

Remote is not properly paired with 

the seat. 

See page 17 for remote pairing 

instructions. 

Summary of Contents for S1201























Reviews: