SERVICE MANUAL
35
7.3.- CLEANING THE BINS (FOR UNDERCOUNTER MODELS)
1) Disconnect the machine, close water faucet and empty storage bin of ice
2) Use the cleaner/water solution to clean all surfaces of the bin. Use a nylon brush or
cloth. Then rinse all areas thoroughly with clean water.
3) Use the sanitizer/water solution to sanitize all surfaces of the bin. Use a nylon brush or
cloth.
4) Rinse with plenty of water, dry, run the machine and open water faucet.
7.4.- CLEANING THE CONDENSER
AIR CONDENSER
1) Disconnect machine and close water faucet.
2) For undercounter models remove the front grid by pressing the two clips placed at right side
(see figure).
For modular models remove the back panel (see figure).
3) Clean condenser using a vacuum cleaner, soft brush or low pressure air. Clean from top to
bottom, not side to side. Be careful not to bend the condenser fins.
Front grid
Back
panel
