18
We Think of Customer Satisfactio
n
Button Operation
ICE
WATER
ICE & WATER
ICE button lamp
- If you turn on the power, this will always come in first. The initial water subtraction
is done three times and then the ICE MAKING operation proceeds. If you put
the cup in the ice exit, you can discharge the ice for the time set in F1.
WATER button lamp
- Press the button to light up. If you put the cup on the ice exit, you can
discharge the water for the time set in F1.
ICE + WATER button lamp
- Press the button to light up. If you put the cup on the ice exit,
you can simultaneously discharge ice and water for the time set in F1.
When ERROR occurs
- ICE-WATER-ICE & WATER button will flicker in order and will disappear
when restarting after the action against the ERROR.
Service cycle setting notification (parts check / replacement cycle notification)
- If the motor is running for more than 10,000 hours, the corresponding lamp
blinks for 5 seconds in the initial stage of the ice maker.
- If the motor is operated for more than 11,000 hours, all the buttons will blink
for 5 seconds in the 1-hour cycle.
※ If all the buttons are flashing, it is a signal to check / replace regular
replacement parts and you should contact the customer service center
(paid service).
Failure to check / replace parts may result in higher repair costs.
