2. Installation
Installing product on shelf
Thank you for purchasing the product. Be sure to familiarize yourself with the
instructions below for correct installation and apply caution to prevent any accident.
1. Open the top cover and loosen the
tightening bolt on the top plate. (Detach
the front cover using the same method.)
2. After detaching the front cover, loosen the
bolts from the protection cover
on the upper right part.
3. Fix the included side brackets as in the
figure.
(Make sure the screws at the front are
slightly tightened.)
4. Insert the bracket downward and fit the
bracket grooves to the side bracket's screws as in
the figure on the right.
(Tighten the two screws for the left side of
the bracket and ice maker.)
5. Upon completing processes up to no. 4, put
the ice maker on the upper part. The soft
foam cover needs to be put on the lower
part of the upper part.
Upper plate
Protection cover
Side bracket
Bracket
11
Summary of Contents for IM/WM-0460-AC
Page 34: ...MEMO 34...
Page 35: ...MEMO 35...
Page 36: ...Online Internet Service http www icetrousa com 3240288 05...
