2. Installation
Installing height controlling footing of container
Put the product on the container and make sure it is gripped tightly as shown below.
The manufacturer is not liable for any incident or injury resulting from the fall of the
product during use.
< Installing the container >
1. Assemble the 4 ice-controlling footings on the bottom of the
container.
2. Adjust the height of the footings by turning them so that they are all of
the same height and the product can be put evenly.
◆
The footings should be inserted deeper than 4".
Installing the product and container
(for the IM/WM-0460-AC/AH/WC/WH, IM/WM-0460-AC/AH(115V),
IM/WM-0460-AC/AH/WC/WH-22, IM/WM-0680-AC/AH/WC/WH)
1. Use the lifting device to put the product on top of
the container.
If no lifting device is available, 2 or 3 men should lift the
product.
◆
The right side of the product has the compressor and
weighs more, so more force has to be applied.
2. The product weighs 160 to 220 lb, so it is not easy to put
on the container in one attempt.
Put the product on the loading part as the first step.
P ro d u c t
(body)
(The loading part should be higher than 40 inches) Loading part
3. Move the product from the loading part to the above of
container as the second step.
8
Summary of Contents for IM/WM-0460-AC
Page 34: ...MEMO 34...
Page 35: ...MEMO 35...
Page 36: ...Online Internet Service http www icetrousa com 3240288 05...
