background image

1 Safety Warnings

Please read this manual carefully before using the iCleaner-120.

Before  performing  maintenance  or  service  on  the  iCleaner-120  please 
ensure the power is disconnected to avoid personal injury or property loss.

The iCleaner-120 is designed for use in swimming pools only. Any other 
use is prohibited and will void manufacturers' warranty.

Do not swim in the pool whilst the iCleaner-120 is in use in order to avoid 
personal injury.

Do  not  allow  the  Power  Box  to  come  in  contact  with  water,  and  it  is 
recommended to be placed in a shady, dry and ventilated area.

When  in  use,  the  Power  Supply  and  Caddy  Cart  must  remain  3  meters 
away from the edge of the pool.

Do not use the iCleaner-120 if there is a chance of thunder storm to avoid 
personal injury.

Users are only permitted to perform maintenance described in this manual. 
Any  tampering  with  the  Motor  Box  or  Power  Supply  will  void  the 
warranty.

Ensure the iCleaner-120 is fully submerged before turning the power box 
on.

If  the  iCleaner-120  is  not  going  be  used  for  a  long  time,  make  sure  to 
disconnect the power, keep it clean and put it in a safe, dry and 
well- ventilated area.

If  the  iCleaner-120  stops  working,  please  refer  to 

t local distributor.

The  optimum  working  temperature  for  the  iCleaner-120  is  between10

and 32

, avoid direct sunlight when not in use.

The  iCleaner-120  is  suitable  for  the  swimming  pools  no  deeper  than  3 
meters.

Lift the iCleaner-120 out of the water using the robot handles, do not lift 
the iCleaner using the floating cable. Lifting via the cable voids warranty.

section  6 

Troubleshooting

.  If  you  cannot  find  the  root  cause,  please  contact 

your

 - 1 -

All manuals and user guides at all-guides.com

Summary of Contents for iCleaner-120/SPC1




















Reviews: