ICHRoboter Pool Cleaner, User Manual

HANGZHOU GAOYUE TECHNOLOGY CO., LTD.

6 Troubleshooting and Warning Lights

Common Fault 

Reason

Solution

Remarks

Pool  Cleaner 
doesn't work

Weak pumping

Pool  Cleaner is

 turning to one side

 when it  moves

Pool  Cleaner will 
not climbs wall 

Dirt is coming
 through the 
Guide Vane.

The Socket is

 not plugged in 

Connection is wrong

Impeller is jammed or 
dirty

Impeller is damage

Filter Bag is full 

Drive Belt is loosen
or broken at one side

The Filter Bag is full 

Filter Bag is full

Drive Belt is 
loosen or broken

Sponge Wheel wear

Axis Sleeves wear

The Sponge Wheel 
don't soak enough

It has air inside 
the machine

Belt of Filter Bag is 
loosen or broken.                                

Plug in the Power Lead 

Check the  connection

Clean the Impeller

Replace the Impeller

Clean the Filter Bag

Clean Filter Bag

Clean the Filter Bag

Replace the Drive Belt

Replace Axis Sleeves

Please turn

 off the power 

before you 

perform any

 maintance 

on the 

Pool  Cleaner

Note: The Power Box MUST BE DISCONNECTED from the Power Supply prior to 
conducting any maintenance on the Pool  Cleaner. Contact your local distributor, or place of 
purchase for problems not covered in Trouble Shooting Guide.

- 17 -

Pool  Cleaner will
not sink to the 
bottom of the pool

Hold Pool  Cleaner in
water and make sure  
Sponge Wheel soak 
enough, normal time is 
about 5-15 minutes

Wobble Pool  Cleaner and
make sure air released

Replace the Drive Belt

Replace the Sponge Wheel

Replace the filter bag 
or use a 20

μ

m

 filter bag