MONOLITE
13
4.7
INVERTING THE DOOR APERTURE (MOD. 45 GT/125 GT)
The door can be opened in either direction (RH or LH). For the door height adjustment see Fig. 2.
Fig. 2 – Door clamping arm
4.8
INVERTING THE DOOR APERTURE (mod. 160 GT/JB - 350 GT/670 JB)
If the door is to be opened to the opposite side, act as follows:
1. Switch the outside nut (or bush) of one hinge with the diametrically opposite closure bush; then at the
hinge side, fasten the cone to the door with the inside nut.
2. Repeat the operation for the other hinge.
3. For any adjustment needed, act on the specific hinge nuts.