4
Option 1: Rear Housing Installation
A.
B.
Place the rear facing
alignment guide on the
mounting position and drill
four Φ2.5 mounting holes
according to the markers
on the alignment guide.
Mount the device with four
M2 screws.
USE THE ALIGNMENT GUIDES TO DRILL HOLES FOR SETTING
DEVICE SCREWS.
THE THERMAL DEVICE WILL ACCUMULATE HEAT DURING
OPERATION. ICI RECOMMENDS MOUNTING THE THERMAL
DEVICE TO METALLIC OBJECTS AT ITS REAR HOUSING WHICH
CAN REDUCE DEVICE HEATING AS WELL AS DECREASE THE
TEMPERATURE DRIFT OF THE DETECTOR.
DO NOT USE TOO LONG SCREWS WHEN INSTALLING THE FRONT/
REAR MOUNTING BRACKET. USING SCREWS THAT ARE TOO LONG
MAY DAMAGE THE THERMAL CAMERA.
