CORONA CAMERA USER MANUAL
31
8-8 UV Alarm Settings
8-8-1 Enable Alarms
By default the imager alarm thresholds are disabled. Enable alarms as follows:
1.
Press OK to access the Main Menu.
2.
Use the Navigation buttons to select the System Settings
3.
Press OK to open the submenu.
4.
Use the Navigation buttons to select System Settings.
5.
Press OK to open the submenu.
6.
Use the Navigation buttons to select UV Alarm.
7.
Press OK to open the drop-down menu.
8.
Use the Navigation buttons to select the preferred option. Select On to
enable. Select Off to disable.
9.
Press OK to confirm selection. Press Back to Cancel selection.
10. Press the Back button repeatedly to exit the menu.
2.
6.
ADJUST THE ALARM THRESHOLD TO HELP REFINE UV DETECTION. WHEN AN
ALARM THRESHOLD IS EXCEEDED AN AUDIBLE ALARM SOUNDS.
