SOUND DETECT & SOUND DETECT PRO USER MANUAL
11
3.
Safety Information
•
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
•
Use the product only for the specified usage.
•
Do not disassemble or modify the device.
•
The heat sinks will become hot when the device is on or has been on.
Beware of touching them. Long term contact may cause burns.
•
Do not use any damaged device, battery or cords.
•
The device is not intended to be used while the battery is being charged.
•
Please do not charge the device in a high temperature environment over
45℃ (113°F). Charging the battery at temperatures outside this range can
cause the battery to become hot or to explode. It can also decrease the
performance or the life cycle of the battery.
•
Do not continue to charge the battery if it does not become charged in
the specified charging time. If you continue to charge the battery, it can
become hot and cause an explosion or ignition. Injury to persons can occur.
•
Do not attach the batteries directly to a car’s cigarette lighter socket. Using the
incorrect equipment can cause the battery to become hot or cause an
explosion.
•
Only use the correct equipment to discharge the battery. Using the
incorrect equipment can decrease the performance or the life cycle of the
battery. Using the incorrect equipment can cause the battery to become
hot or cause an explosion.
•
Do not connect the positive terminal and the negative terminal of the
battery to each other with a metal object (such as wire). Damage to the
batteries can occur.
•
The battery contains safety and protection devices which, if they become
damaged, can cause the battery to become hot, or cause an explosion or
an ignition.
•
Do not put holes in the battery with objects. Damage to the battery may occur.
•
Do not hit the battery with a hammer or apply strong impacts or electric
shocks to it. Damage to the battery may occur.
•
Do not put the battery in or near a fire, stove or other high-temperature
locations. Damage or ignition of the battery may occur.
•
Do not put the battery in direct sunlight or other high-temperature
locations. Damage or ignition of the battery may occur.
•
Do not solder directly onto the battery. Damage to the battery may occur.
•
Do not get water or salt water on the battery or device or permit the device
or battery to get wet. Damage to the battery may occur.
