SOUND DETECT & SOUND DETECT PRO USER MANUAL
50
8-10 Dynamic Range
Quickly adjust the dynamic range by tapping the palette bar; a quick slider
appears. Press-and-hold on the slider; then, drag up or down to adjust the
dynamic range.
The dynamic range can also be adjusted as follows:
1.
Using the touchscreen, tap the Display Window to open the main menu.
2.
Tap the Acoustic icon. A window appears.
3.
Press-and-hold on the dynamic range slider; then, drag left or right to
adjust the value.
4.
Tap outside window to exit the Acoustic window. The main menu closes
automatically due to inactivity.
8-11 Cursors & Sound Pressure Levels (SPLs)
The cursor function can be enabled or disabled. When the cursor and sound
pressure level function is enabled, a cursor shows on the Display Window and
the cursor number shows below the cursor. Data collected by the cursor displays
below the photo/video mode indicator in the upper right corner of the Display
Window. If three cursors are set, the SPLs shown by the cursors are shown
sequentially from top to bottom.
Enable/disable cursors and SPLs as follows:
1.
Using the touchscreen, tap the Display Window to open the main menu.
2.
Tap the Acoustic icon. A window appears.
3.
Tap the drop-down box next to Cursor & SPL; then, tap to select a number
up to 3.
4.
Tap outside window to exit the Acoustic window. The main menu closes
automatically due to inactivity.